Treated Posts, Poles, Pilings & Timbers
Pressure Treated Utility Poles
  Boardwalk Pilings - Pilings for Docks, Marinas &  Piers

Gulf Coast Lumber is an international supplier of pressure treated boardwalk pilings, and pilings for boathouses, bridges, bulkheads, decks, docks, foundations and piers, with locations in Houston, Texas and the Central American Country of Costa Rica. Our marine piling is treated with CCA at 2.50 pcf (pounds per cubic foot) for use in salt and brackish water applications. Piling for land, freshwater immersion, and foundation use is treated with CCA at either .60 or .80 pounds per cubic foot depending on your requirements and specifications. Call us at 281-670-8631 or contact us online for a quotation.

We also sell a full line of stringers and framing lumber for piers and docks. We have both rough and dressed lumber in 2", 3", 4" and 6" thicknesses up to 12" in width.  Stringers for use in salt and brackish water, we sell treated with CCA, and for freshwater applications, we sell stringers treated with MCQ.

Don’t be fooled by the competition!
All of our marine pilings, poles and timber is kiln dried prior to treatment to ensure maximum penetration of the preservative.   Upon request, we will provide Certifications of Treatments on all Poles, Pilings or Timber purchased from Gulf Coast Lumber. Call us at 281-670-8631 or contact us online to discuss your needs.


 
  Treated Poles
 
 

Gulf Coast Lumber sells a complete line of treated wood utility poles with lengths up to 120 feet.  Our utility poles are made from Southern Yellow Pine that is selected and manufactured to comply with American National Standard Institute (ANSI) Specifications, and we can meet additional customer specifications as required. Gulf Coast Lumber provides varying degrees of treatment designed to delay the decaying process and ensure pole longevity. Gulf Coast Lumber can supply practically any size pole, you may require to anywhere in the world.

Our Product Specialists are ready to answer any questions you may have regarding our treated poles. Call us at 281-670-8631 or contact us online.

 
 
  Benefits of Building with Poles & Pilings
 
 
Treated Poles and Pilings have long life spans due to reduced heartwood exposure.
Treated poles and pilings are stronger and suffer less warping than dimensional timbers.
Long life span and superior strength make treated poles and pilings very cost effective. Normally less expensive than comparable square timber.
GCL can provide solid NO-TAPER poles call us at 281-670-8631.
Polymer coating will drastically increase the longevity of any pole or piling.
 
  Large Pole and Piling Size Chart
 
 
Size*
8'
10'
12'
14'
16'
18'
20'
10" Butt
Stock
Stock
Stock
Stock
Stock
Stock
Stock
11" Butt
Avail
Avail
Avail
Avail
Avail
Avail
Avail
12" Butt
Stock
Stock
Stock
Stock
Stock
Stock
Stock
13" Butt
Avail
Avail
Avail
Avail
Avail
Avail
Avail
               
Size*
25'
30'
35'
40'
45'
50'
55'
10" Butt
Stock
Stock
Stock
N/A
N/A
N/A
N/A
11" Butt
Avail
Avail
Avail
Avail
Avail
Avail
N/A
12" Butt
Stock
Stock
Stock
Stock
Stock
Avail
Avail
13" Butt
Avail
Avail
Avail
Stock
Stock
Stock
Avail
Need A 60 or 70' Pole?  Contact us at (281) 670-8631 we can supply poles up to 120'.

*Poles taper approximately 1" in diameter per ten feet of length
*All sizes and lengths can be treated CCA to .40, .60, .80, or 2.5 pcf
 
 
  Polymer Coated Wood for the Ultimate Protection
 
 

A protective polymer vinyl coating engineered specifically for use on wood. The polymer coating bonds to wood creating a protective barrier that is impenetrable to marine borers & termites.

Architects, Contractors and Engineers offer polymer coated wood products to set themselves apart from the competition as offering unique products to solve their client requirements. Wood with our polymer coating is an excellent value-add offering for customers, creating a product that will last virtually forever. Our polymer zone coated Fence Posts and Utility Poles will NOT rot at the ground line.

Utility companies benefit from using zone coated polymer poles with savings of labor and materials costs.

The benefits of using polymer coatings for a utility company are simple.
 
Polymer Zone Coating:
• Prolongs the useable life of the utility pole.
• Prevents the need for wrapping the pole in the future - saving material and labor cost.
• Assures environmental protection - chemicals cannot leach into soil.
• Polymer Coating is applied at the production facility - no on site labor is required.
• Can be drilled or cut if required.

Call us at 281-670-8631 or contact us online to discuss how Polymer Vinyl coatings can make your project's treated piling or pole last longer.

 
Copyright 2009 Gulf Coast Lumber All Rights Reserved.